 |
 |
 |
 |
 |
 |
|
Model 6000 |
|
|
Frequency Range: 2-8 GHz Pattern: Omnidirectional Polarization: Vertical Gain: 2.5 dBi nominal Impedance: 50 Ohms VSWR: 1.7:1 max Power Handling: 500 Watts CW Wind Resistance: 80 MPH RF Connector: Type “N” female, stainless steel Construction Material Aluminum and brass Finish: White polyester powder coat Overall Diameter: 3.25 inches Mast Diameter: 1.75 inches Height: 6 inches (minus extension mast) Weight: Approx. 1lb Uses: Point-to-point microwave radio, Wireless video surveilance WLL 4.9 GHz public safety Telemetry Options: Supplied with extension mask Magnetic mount available. |
 |
|
Model 5001 |
|
|
Frequency Range: 220-1200 MHz Pattern: Omnidirectional Polarization: Vertical Gain: 1.8 dBi nominal Impedance: 50 Ohms VSWR: 1.8:1 maximum Power Handling: 500 Watts CW Wind Resistance: 80 MPH RF Connector: Type “N” female, stainless steel Construction Material: Aluminum Standard Finish: White polyester powder coat Overall Diameter: 18 inches Mast Diameter: 1.25 inches Height: 14.40 inches Weight: Approximately 9 lbs Uses: Civil telecommunications, Military air-to-ground |
 |
|
Model 5002 VHF/UHF Discone Antenna |
|
|
Frequency: 100-1200 MHz Pattern: Omnidirectional Polarization: Vertical Gain: 1.8 dBi Nominal Impedance: 50 ohm VSWR: 1.8:1 MAX Power Handling: 500 Watts CW Wind Resistance: 80 MPH RF Connector: Type "N" Female, stainless steel Construction Material: Aluminum Finish: White polyester powder coat Overall Diameter: 39 inches Mast Diameter: 1.25" O.D. Height: 50 inches Weight: Approx. 15 lbs. Uses: Civil & military air-to-ground |
 |
|
Model 5007 Discone Antenna |
|
|
Frequency Range: 90-1200 MHz Pattern: Omnidirectional Polarization: Vertical Gain: 1.8 dBi nominal Impedance: 50 ohm VSWR: 2:1 maximum Power Handling: 500 Watts CW Wind Resistance: 80 MPH RF Connector: Type “N” female, stainless steel Construction Materials: Aluminum & brass Finish: Gray polyester powder coat Overall Diameter: 39 inches Mast Diameter: 1.25 inches Height: 59.50 inches Dimensions: Height: 59.5" Diameter: 39" Weight: Approx. 9 lbs. Uses: Military air-to-ground (ruggedized for shipboar duse) |
 Shown with Interad Model MK1 ship-/vehicle-deck mounting socket |
|
Model 5009 VHF/UHF Discone Antenna |
|
|
Frequency: 100 -3000 MHz Pattern: Omnidirectional Polarization: Vertical Gain: 1.8 dBi Nominal Impedance: 50 ohm VSWR: 2:1 Maximum Power Handling: 500 Watts CW Wind Resistance: 80 MPH RF Connector: Type "N" Female, Stainless Steel Construction Material: Aluminum/Stainless Steel Finish: Gray polyester powder coat Overall Diameter: 39 inches Mast Diameter: 1.25 inches Height: 59.50 inches Weight: Approximately 20 lbs. Uses: Civil & military air-to-ground, PCS & cellular |
 Shown with Interad Model MK1 ship-/vehicle-deck mounting socket |
|
Model 5017B |
|
|
Frequency Range: 30-1900 MHz Pattern: Omnidirectional Polarization: Vertical Gain: 1.8 dBi nominal Impedance: 50 Ohms VSWR: 2:1 maximum Power Handling: 500 Watts CW Wind Resistance: 50 MPH RF Connector: Type “N” female, stainless steel Construction Materials: Aluminum & brass Finish: White polyester powder coat Overall Diameter: 96 inches Mast Diameter: 2.25 inches Height: 144 inches Weight: Approximately 40 lbs Uses: Ground point-to-point, Civil & military air-to-ground, PCS & cellular |
 |
|
Model 5097A Antenna |
|
|
Ideal for all cellular & PCS bands Frequency Range: 800-3000 MHz Pattern: Omnidirectional Polarization: Vertical Gain: 1.8 dBi nominal Impedance: 50 ohm VSWR: 1.8:1 maximum Power Handling: 500 Watts CW Wind Resistance: 80 MPH RF Connector: Type “N” female, stainless steel Construction Materials: Aluminum & brass Finish: White polyester powder coat Overall Diameter: 6 inches Mast Diameter: 1.25 inches Height: 10.50 inches Weight: Approximately 2 lbs Dimensions: Height: 10.5" Uses: PCS & cellular |
 |
|
Model TASU-0145 Triple 9-Way Antenna Switch Unit |
|
|
Frequency Range: 1.5 - 50 MHz minimum RF Inputs: 9 RF Output: 1 thru commutation Impedance: 50 Ohms RF Level: +20 dBm maximum VSWR: 2.0:1 maximum Blanking: 60 dB minimum. During blanking all antennas, as well as the commuted output, are terminated in 50 Ohms. IP 3 Out: +34 dBm minimum IP 2 Out: +65 dBm minimum Weight: 24 lbs. |
 |
|
Model 3100 Modular HF Receiver System |
|
 Click here for data sheetSets New Performance Standards With: - Phase Coherence - No Local Oscillators - High Dynamic Range - 400 Mbps Firewire Output Connection. |
 |
|
Model 9640 Dual HF Receiver |
|
|
Frequency Range: 0.56 MHz to 32 MHz. For coverage below 2.0 MHz the receiver provides a straight-through RF path for the 0.56 to 4.56 MHz frequency range. Final Baseband IF Center: Bandwidth of 4.0 MHz centered at 2.56 MHz Frequency and Bandwidth Spectral Alignment: Non-inverting Synthesizer Control: The synthesizer is tuned using an RS-232C interface RF Gain Control: Each RF converter includes an input RF and final IF attenuator. The RF attenuators provide a minimum of 30 dB attenuation range in 2 dB steps and the IF attenuators provide a 20 dB minimum range in 2 dB steps. Baseband Output 2nd Order IP: +90 dBm minimum Baseband Output 3rd Order IP: +45 dBm minimum |
 |
|
Model 9644 Frequency-Synthesized Wideband HR Receiver |
|
|
Click here for data sheet Available as dual-channel or single-channel receiver Dual version configurable as 2 independent or 2 coherent recievers Single version available with digitized output clocked from 80 MHz external source Synthesizer with 100 microsecond max tuning speed enables tuning 1.0 MHz in 0.5 MHz steps Unit is easily controlled via RS-232 interface |
 |
|
Model 9776-10 VHF/UHF High Performance Recevier/Translator |
|
|
Click here for data sheet A smaller, single-channel version is available Configuration: 1 to 8 RF Translators Frequency Range: Tunable 20-2120 MHz VSWR: 2.5:1 maximum into 50 ohms Bandwidth IF BW: 2 dB bandwidth of 10 MHz centered at 6.5 MHz SFDR: 80dB Tuning: In less than 50 microseconds Output Amplitude level Matches high performance ADCs Output Amplitude level Clamped to prevent damage to ADC |
 |
|
Model 9776-25 VHF/UHF High Performance Recevier/Translator |
|
|
Click here for data sheet A smaller, single-channel version is available Configuration: 1 to 8 RF Translators Frequency Range: Tunable 25-2120 MHz VSWR: 2.5:1 maximum into 50 ohms Bandwidth IF BW: 25 MHz centered at 17 MHz SFDR: 80dB Tuning: In less than 50 microseconds Output Amplitude level Matches high performance ADCs Output Amplitude level Clamped to prevent damage to ADC |
|
|
Model 9776-S (D/E) Single Channel Receiver |
|
|
Range: 25 - 2120 MHz Bandwidth IF BW: 10 MHz centered at 6.5 MHz Spectral Alignment: Non-inverting Baseband Output 2nd Order IP: +90 dBm minimum Baseband Output 3rd Order IP: +45 dBm minimum RF Gain Control: RF attenuator - 30 dB in 2 dB steps Control Interfaces: RS-232C |
 |
|
VLF-2055 Receiver Upconverter |
|
|
Input Frequency Range: 10 KHz-1.6 MHz (2 dB bandwidth) Output Frequency Range: Upconverted to an A/D input range of 5.01-6.6 MHz Output Level: +4 dB nominal Gain: 40 dB Size: 6u x 160 mm double slot VME RF Gain Control: RF Attenuation -- 45 dB in 3 dB steps Three Selectable Band Suppression Filters: Nominal 3 dB bandwidths of 148.5-255 KHz, 255-283.5 KHz, 525 KHz low pass, minimum null of 20 dBm |
 |
|
V/UUC-2021 Single Channel Upconverter |
|
|
Input Frequency Range: 1.5 MHz to 11.5 MHz baseband Output Frequency Range: 20 MHz to 2120 MHz (tunable in 1 MHz steps) Gain: 48 dB Gain Control: 45 dB External Control: RS-232 |
 |
|
Model MCFU-2101 Multichannel Notch Filter Unit |
|
|
Click here for data sheet Eight Matched Notch Filter Channels Four Fixed and Four Tunable Filters Per Channel 1 MHz to 12 MHz frequency range 20 dB minimum rejection, 30 dB typical -80 dB interchannel crosstalk. |
 |
|
Model PLO-2002 Phase-Locked Oscillator |
|
|
Click here for data sheet Designed to support fast A/D clocking Excellent phase noise & dynamic range Standard 10 MHz reference, with front panel lock detector indicator |
 |
